Powerdynamo brings new ignition & light 
to your vintage motorcycle



Technical Help



  This regulator (part 73 00 799 50) replaces both the standard 12V Powerdynamo regulator/rectifier and the rather large smoothing condenser. You save space, weight and assembly time.
Though this part makes most sense in non battery environments, it may also be used together with a battery. No problem here.

There is no charge control light facility. (For the main purpose of this regulator however, driving without battery, this point should be irrelevant).

Note: only for 12V and only for Powerdynamo systems using as standard regulator 95 22 699 06 which it can replace.

Regulator as separate extra
part 73 00 799 50 Price

Regulator as option
(ordered at same time as a system) part 73 00 799 XX Price
you buy in our shop under <regulator> in addition to a system at time of system order. (The system will than be equipped with this regulator and not the standard 95 22 699 06 one)

For more wiring information see here

red = plus 12V DC to motorcycle consumers

brown = negative ground

AC black in are the 2 black wires from the PD Magneto bringing unregulated AC voltage

compare sizes and weights!

top left: standard 95 22 699 06 (weight 250gr)
top right: condenser 70 22 000 00  (weight 80gr)
below regulator 73 00 799 50 (weight 140 gr)
dims 90x40x22 (plus wires)
Sketch see here

Klick on pictures to enlarge

 back to driving without battery                to offroad lighting