generator/electronic ignition
for Pannonia P20/P21 (2 cylinder)

Replaces completely old dynamo, regulator, centrifugal governor and ignition coils. The system is technically capable of running without battery. (Should side indicators be installed however, you will need in that case a potent condenser (22.000µF) to smoothen the pulsing voltage.)
Contrary to our policy ("No changes on engine casing needed"), you have to do a little modification at your engine case: a 10mm drill hole to enable wire exit.

• all parts are new
• very stable ignition with high energy spark
• better starting and fuel burning
• no problem with points anymore

• assembly instructions
• wiring diagram
• parts in the pack (photo)

• engine with the system
• the new stator
• the new rotor
• the original generator
• the little modification at the engine case
  (opening for cable exit)